|

TURQUOISE AND IVORY SPIRAL CROCHET BEDSPREAD

Free Photo-Inspired Motif Pattern and Assembly Guide

INTRODUCTION

Fresh, elegant, and full of movement, this turquoise and ivory spiral crochet bedspread creates a striking coastal-inspired focal point for the bedroom. The design is assembled from many circular lace motifs featuring two curved sections that appear to flow around one another.

One half of each motif is worked in vibrant turquoise, while the second half is crocheted in soft ivory. The colors begin at a small central opening and sweep outward in a dramatic spiral. Long radiating stitches surround the solid center, followed by open chain arches and tiny flower-like scallops.

When the motifs are joined, the repeated spirals create a continuous pattern across the bed. The openwork connections keep the finished piece flexible and prevent the large bedspread from looking too heavy.

The same motifs can also be used to create matching pillow covers, a smaller throw, a table runner, or individual decorative mats.

ABOUT THIS PATTERN

This is a photo-inspired crochet reconstruction based on the visible design. It is not the original designer’s exact pattern.

The reference image appears to feature a complex two-color interlocking spiral. The instructions below use a practical two-color crochet method to create a similar effect.

Your finished motif may look slightly different depending on:

Yarn thickness

Hook size

Stitch tension

Number of center rounds

Length of chain arches

Blocking method

Make and block one complete sample motif before beginning a large bedspread.

This pattern uses US crochet terminology.

PROJECT OVERVIEW

The bedspread is made from separate circular motifs.

Each motif includes:

A small open center

One turquoise spiral section

One ivory spiral section

A solid circular body

A ring of long radiating stitches

Open decorative arches

A scalloped or flower-like edge

Joining points around the border

The motifs are blocked to the same measurement and arranged in rows. They may be joined during the final round or connected afterward.

Small filler flowers or chain bridges can be added between the motifs.

SKILL LEVEL

Intermediate to advanced

You should be comfortable with:

Working in rounds

Working with two active yarn colors

Securing inactive yarn loops

Single crochet

Half double crochet

Double crochet

Treble crochet

Increasing evenly

Working into chain spaces

Making clusters and picots

Joining crochet motifs

Blocking lace

FINISHED SIZE

Using sport-weight cotton and a 3.5 mm crochet hook, one blocked motif should measure approximately:

8 to 10 inches across

Suggested project sizes:

Baby blanket: 30 x 36 inches

Lap blanket: 40 x 50 inches

Throw blanket: 50 x 60 inches

Twin bedspread: 66 x 90 inches

Full bedspread: 80 x 96 inches

Queen bedspread: 90 x 100 inches

King bedspread: 108 x 100 inches

The final border may add several inches to the finished dimensions.

MATERIALS

You will need:

Turquoise cotton or cotton-blend yarn

Ivory or warm white cotton or cotton-blend yarn

A 3 mm to 4 mm crochet hook

Scissors

Yarn needle

Measuring tape

Two colors of locking stitch markers

Blocking mats

Rustproof blocking pins

Optional row labels

Optional small clips for holding live loops

Optional storage bags for finished motifs

Optional matching fabric for pillow backs

YARN ESTIMATES

Approximate total yardage:

Baby blanket: 1,200 to 1,700 yards

Lap blanket: 1,800 to 2,500 yards

Throw blanket: 2,500 to 3,500 yards

Twin bedspread: 4,000 to 5,500 yards

Full bedspread: 5,000 to 7,000 yards

Queen bedspread: 6,000 to 8,500 yards

King bedspread: 7,500 to 10,000 yards

Purchase approximately equal amounts of turquoise and ivory.

Add 10 to 15 percent extra for:

Joining

Swatching

The outer border

Gauge differences

Possible future repairs

CHOOSING THE BEST YARN

A smooth cotton yarn is recommended because it provides crisp stitch definition and responds well to blocking.

Suitable yarn options include:

Sport-weight cotton

Light DK cotton

Mercerized cotton

Cotton and bamboo blend

Cotton and acrylic blend

Fine recycled cotton

Sport-weight cotton produces a light decorative bedspread. DK cotton creates a thicker and warmer piece.

Avoid extremely fuzzy yarn because it can hide the spiral division and delicate border details.

HOOK SIZE

Choose a hook that creates flexible stitches without making the motif excessively loose.

Suggested combinations:

Sport-weight cotton: 3 mm to 3.5 mm hook

Light DK cotton: 3.5 mm to 4 mm hook

DK cotton: 4 mm to 4.5 mm hook

If the center cups, use a larger hook or add more increases.

If the center ruffles, use a smaller hook or remove several increases.

COLOR SUGGESTIONS

The photographed bedspread uses turquoise and ivory.

Other attractive combinations include:

Teal and cream

Aqua and white

Navy and pale blue

Sea green and sand

Sage and ivory

Coral and cream

Lavender and white

Mustard and gray

Dusty rose and beige

Black and ivory

For a calm coastal look, combine turquoise with cream or sand.

For a bold modern appearance, use turquoise with charcoal gray.

ABBREVIATIONS

This pattern uses US crochet terms.

MR – Magic ring

Ch – Chain

Sl st – Slip stitch

Sc – Single crochet

Hdc – Half double crochet

Dc – Double crochet

Tr – Treble crochet

Inc – Increase

St – Stitch

Sts – Stitches

Sp – Space

Ch-sp – Chain space

Sk – Skip

Rnd – Round

Rep – Repeat

FO – Fasten off

SPECIAL STITCHES

DOUBLE CROCHET INCREASE

Work 2 dc in the same stitch.

V-STITCH

Work 1 dc, ch 1, and 1 dc in the same stitch or space.

THREE-DOUBLE-CROCHET CLUSTER

Yarn over and insert the hook into the indicated stitch or space.

Yarn over and pull up a loop.

Yarn over and pull through two loops.

Repeat the partial double crochet twice more in the same space.

Yarn over and pull through all loops on the hook.

PICOT

Ch 3 and sl st into the first chain made.

SMALL SCALLOP

Work 1 sc, 3 dc, and 1 sc into the same space.

LARGE SCALLOP

Work 1 sc, 5 dc, and 1 sc into the same space.

FLOWER SCALLOP

Work 1 sc, ch 3, 3-dc cluster, ch 3, and 1 sc into the same space.

LONG CHAIN ARCH

Ch 7 to ch 10 and anchor the chain with a single crochet in the indicated space.

TWO-COLOR SPIRAL METHOD

The turquoise and ivory yarns remain attached during the construction of the center.

After completing one color section, enlarge its working loop and secure it with a stitch marker.

Return to the other color and continue crocheting.

Alternating the two working yarns allows the colored sections to grow around each other.

GAUGE

Exact stitch gauge is less important than maintaining the same size across all motifs.

One blocked motif should measure approximately 8 to 10 inches.

Every motif in the bedspread should use:

The same yarn

The same hook

The same stitch counts

The same number of rounds

The same blocking measurement

PATTERN NOTES

Do not cut the yarn each time you change colors.

Use a turquoise marker for the turquoise loop and a second marker for the ivory loop.

Keep inactive loops large enough that they cannot unravel.

Count the stitches in each colored section separately.

Work the same increase sequence with both colors.

Make one complete test motif before beginning the remaining pieces.

PART ONE: STARTING THE SPIRAL CENTER

Create a loose magic ring with turquoise yarn.

With turquoise, work into the ring:

1 sc

1 hdc

2 dc

2 tr

Enlarge the turquoise working loop and secure it with a stitch marker.

Do not fasten off.

Join ivory yarn in the same center ring immediately after the turquoise stitches.

With ivory, work:

1 sc

1 hdc

2 dc

2 tr

Enlarge the ivory loop and secure it with another marker.

Pull the magic ring gently until a small decorative opening remains.

Each color should contain 6 stitches.

The change from short stitches to tall stitches begins the curved spiral.

PART TWO: FIRST TURQUOISE EXTENSION

Return the turquoise loop to the hook.

Work across the 6 ivory stitches.

Work 2 dc in every ivory stitch.

You should add 12 turquoise dc.

Stop when you reach the original turquoise section.

Enlarge and secure the turquoise loop.

PART THREE: FIRST IVORY EXTENSION

Return the ivory loop to the hook.

Work across the 6 original turquoise stitches.

Work 2 dc in every turquoise stitch.

You should add 12 ivory dc.

Stop at the beginning of the extended ivory section.

Enlarge and secure the ivory loop.

The two colors should now begin flowing around the center.

PART FOUR: SECOND SPIRAL EXTENSION

With turquoise, repeat across the available ivory stitches:

1 dc in the next stitch

2 dc in the following stitch

Continue to the color boundary.

Secure the turquoise loop.

With ivory, repeat across the turquoise stitches:

1 dc in the next stitch

2 dc in the following stitch

Continue to the color boundary.

Secure the ivory loop.

PART FIVE: THIRD SPIRAL EXTENSION

With turquoise, repeat:

1 dc in each of the next 2 stitches

2 dc in the following stitch

Continue across the ivory edge.

Secure the loop.

With ivory, repeat:

1 dc in each of the next 2 stitches

2 dc in the following stitch

Continue across the turquoise edge.

Secure the loop.

PART SIX: FOURTH SPIRAL EXTENSION

With turquoise, repeat:

1 dc in each of the next 3 stitches

2 dc in the following stitch

Continue to the color boundary.

Secure the loop.

With ivory, repeat:

1 dc in each of the next 3 stitches

2 dc in the following stitch

Continue to the color boundary.

Secure the loop.

PART SEVEN: FIFTH SPIRAL EXTENSION

With turquoise, repeat:

1 dc in each of the next 4 stitches

2 dc in the following stitch

Secure the loop.

With ivory, repeat:

1 dc in each of the next 4 stitches

2 dc in the following stitch

Secure the loop.

The two colors should now form broad curved sections resembling interlocking commas.

MAKING A LARGER SOLID CENTER

Continue the increase formula if a larger motif is desired.

Next extension:

Work 1 dc in each of the next 5 stitches, then work 2 dc in the following stitch.

Following extension:

Work 1 dc in each of the next 6 stitches, then work 2 dc in the following stitch.

Increase the number of plain stitches between increases by one in each new extension.

Complete the same extension with both colors.

CREATING A DEEP INNER CURL

The pictured motif has a strongly curved center.

To emphasize the curl, change the stitch height gradually.

Near the inner end of each colored section, use:

2 sc

2 hdc

Across the middle, use dc.

Near the widest part, use:

2 or 3 tr

Finish the section with:

2 dc

2 hdc

1 sc

The gradual height changes encourage the section to sweep around the center.

Keep the total stitch count consistent in both colors.

PART EIGHT: TAPERING THE SPIRAL SECTIONS

When the solid center measures approximately 5 to 6 inches, taper each section.

With turquoise, work:

2 dc

2 hdc

2 sc

1 sl st

Fasten off turquoise.

With ivory, work:

2 dc

2 hdc

2 sc

1 sl st

Fasten off ivory.

The solid center should now form a nearly complete circle.

PART NINE: STABILIZING ROUND

Join turquoise yarn at any point around the outer edge.

Round 1:

Ch 1.

Work sc evenly around the entire spiral.

Place approximately one sc in the top of each stitch.

Add one extra sc at a color transition if needed to close a gap.

Join with a sl st.

Count the stitches.

Adjust the total to a multiple of 12.

A total of 96 stitches works well for a medium motif.

Round 2:

Ch 1.

Work 1 sc in every stitch around.

Join with a sl st.

PART TEN: FIRST OPENWORK ROUND

Continue with turquoise.

Round 3:

Ch 5. This counts as 1 dc and ch 2.

Skip the next stitch.

Work 1 dc in the following stitch.

Repeat around:

Ch 2, skip 1 stitch, dc in the next stitch.

Join with a sl st in the third chain of the beginning ch-5.

If the round pulls inward, use ch 3 spaces.

PART ELEVEN: RADIATING TREBLE ROUND

Round 4:

Sl st into the first ch-2 space.

Ch 6. This counts as 1 tr and ch 2.

Work 1 tr in the same space.

In every remaining ch-2 space, work:

1 tr, ch 2, 1 tr.

Join with a sl st in the fourth chain of the beginning chain.

These tall stitches form the long openings around the spiral center.

PART TWELVE: INNER CHAIN ARCHES

Round 5:

Sl st into the first ch-2 space.

Work 1 sc in the space.

Ch 5.

Work 1 sc in the next ch-2 space.

Repeat around:

Ch 5, sc in the next space.

Join with a sl st.

Fasten off turquoise.

PART THIRTEEN: IVORY LACE ROUND

Join ivory yarn in any ch-5 space.

Round 6:

In each ch-5 space, work:

1 sc, ch 5, 1 sc.

Repeat around.

Join with a sl st.

Round 7:

Sl st into the first ch-5 space.

Work 5 sc into each ch-5 space around.

Join with a sl st.

PART FOURTEEN: LARGE OUTER LOOPS

Continue with ivory.

Round 8:

Ch 1 and work 1 sc in the first stitch.

Ch 7.

Skip the next 4 stitches.

Work 1 sc in the following stitch.

Repeat around.

Join with a sl st.

Adjust one or two spaces if the repeat does not divide evenly.

Round 9:

Sl st into the first ch-7 space.

Work 9 sc into the space.

Work 9 sc into every remaining ch-7 space.

Join with a sl st.

PART FIFTEEN: FLOWER-LIKE EDGE

Continue with ivory.

Round 10:

In the first arch, work:

1 sc

3 dc

Picot

3 dc

1 sc

Repeat in every arch around.

Join with a sl st.

Fasten off.

ALTERNATIVE SIMPLE SCALLOP

Work the following into every arch:

1 sc, 5 dc, 1 sc.

ALTERNATIVE BOBBLE EDGE

For a rounded flower-like finish, work:

1 sc, ch 3, 3-dc cluster, ch 3, 1 sc

into every arch.

CONTINUING BOTH COLORS THROUGH THE BORDER

To make the two-color spiral more pronounced, work half of each openwork round in turquoise and the other half in ivory.

At the first spiral boundary:

Secure the turquoise loop.

Join or continue with ivory.

Work the same stitch sequence across the ivory half.

At the second boundary:

Join the two sections with slip stitches.

Repeat this method in every lace round.

This option requires more ends but creates a stronger color division.

CHECKING THE MOTIF

Place the completed motif on a flat surface.

Check that:

The center opening is neat.

Both colors are balanced.

The spiral curves smoothly.

The motif lies reasonably flat.

The long stitches are evenly spaced.

The chain arches have similar sizes.

The scallops form a continuous border.

There are clear points for joining.

BLOCKING THE SAMPLE

Soak the motif in lukewarm water for approximately 10 to 15 minutes.

Press out excess water gently.

Do not twist or wring it.

Roll it inside a clean towel.

Place the motif on a blocking mat.

Pin the center.

Shape the turquoise and ivory curves.

Stretch the openwork evenly.

Pin every outer scallop or every second scallop.

Measure the motif in several directions.

Adjust the pins until the motif is round.

Allow it to dry completely.

Record the blocked diameter.

CALCULATING THE MOTIF COUNT

Make and block three motifs.

Join them into one sample row.

Measure the joined width.

Divide the desired bedspread width by the joined motif measurement.

Repeat the calculation for the desired length.

Add more motifs if you want the bedspread to hang deeply over the sides and foot of the bed.

SUGGESTED MOTIF COUNTS

Small throw:

5 motifs across

6 motifs down

30 motifs total

Large throw:

6 motifs across

7 motifs down

42 motifs total

Twin bedspread:

7 motifs across

10 motifs down

70 motifs total

Full bedspread:

9 motifs across

10 motifs down

90 motifs total

Queen bedspread:

10 motifs across

11 motifs down

110 motifs total

King bedspread:

12 motifs across

11 motifs down

132 motifs total

These counts are examples. Use the actual blocked measurement of your motif.

ARRANGING THE SPIRALS

ALL MOTIFS FACING THE SAME DIRECTION

This creates a continuous flowing effect across the bed.

ALTERNATING DIRECTION

Rotate every second motif 180 degrees to create a mirrored pattern.

DIAGONAL DIRECTION

Gradually rotate the motifs across each row to produce diagonal movement.

RANDOM ROTATION

Turn the motifs in different directions for an artistic arrangement.

Arrange all motifs before joining and photograph the final layout.

JOIN-AS-YOU-GO METHOD

Complete the first motif.

On the second motif, begin the final scallop round.

At every planned connection:

Work half of the scallop.

Ch 1.

Sl st into the corresponding scallop on the first motif.

Ch 1.

Complete the scallop.

Join neighboring motifs at three to five evenly spaced points.

Do not join every stitch because the lace needs room to move.

WHIP-STITCH JOIN

Block every motif to the same size.

Place two motifs with the right sides together.

Thread matching yarn onto a yarn needle.

Sew through corresponding outer loops.

Keep the seam relaxed.

Open the motifs and check that they lie flat.

SLIP-STITCH JOIN

Place two motifs with the wrong sides together.

Insert the hook through one outer loop from each motif.

Yarn over and pull through both loops and the loop on the hook.

Continue across the joining area.

Use a larger hook if the seam feels tight.

CHAIN-BRIDGE JOIN

Attach yarn to a scallop on the first motif.

Ch 3.

Sl st into the corresponding scallop of the second motif.

Ch 3.

Sl st into the next scallop on the first motif.

Continue alternating between both motifs.

This method creates a decorative zigzag connection.

FILLING THE OPEN SPACES

Four circular motifs leave a small opening where they meet.

The opening can remain uncovered or be filled with a small flower.

SMALL FILLER FLOWER

Make a magic ring.

Round 1:

Work 8 sc into the ring.

Join with a sl st.

Round 2:

Ch 5 and work 1 sc in the next stitch.

Repeat around.

You should have 8 loops.

During the final round, join four evenly spaced loops to the surrounding motifs.

FAST CHAIN CONNECTOR

Join yarn to the first motif.

Ch 5 and sl st into the second motif.

Ch 5 and sl st into the third motif.

Ch 5 and sl st into the fourth motif.

Ch 5 and join to the starting point.

Work one small scallop in each chain space if desired.

OUTER BEDSPREAD BORDER

After joining the motifs, work around the entire outer edge.

BORDER ROUND 1

Join turquoise yarn at any corner.

Ch 1.

Work sc evenly around the bedspread.

At each corner, work:

2 sc, ch 2, 2 sc.

Where two motifs meet, work a decrease if the edge feels crowded.

Join with a sl st.

BORDER ROUND 2

Ch 4. This counts as 1 dc and ch 1.

Skip the next stitch.

Work 1 dc in the following stitch.

Repeat around:

Ch 1, skip 1 stitch, dc in the next stitch.

At each corner, work:

1 dc, ch 2, 1 dc.

Join with a sl st.

BORDER ROUND 3

Change to ivory.

Sl st into the first ch-1 space.

Work 1 sc in the space.

Ch 4.

Work 1 sc in the next ch-1 space.

Repeat around.

Use ch 6 in each corner.

Join with a sl st.

BORDER ROUND 4

Work 5 sc into every ch-4 space.

In each corner ch-6 space, work:

5 sc, ch 2, 5 sc.

Join with a sl st.

BORDER ROUND 5

Change to turquoise.

In every arch, work:

1 sc, 3 dc, picot, 3 dc, 1 sc.

Repeat around.

At the corners, add an extra ch 2 between scallops if needed.

Join and fasten off.

OPTIONAL DEEP LACE BORDER

For a luxurious overhanging edge, add:

One round of ch-5 loops

One round of tall V-stitches

One round of ch-7 loops

One round of sc over the loops

One final round of scallops or clusters

Alternate turquoise and ivory between the rounds.

MAKING MATCHING PILLOW COVERS

The reference design includes two matching pillows decorated with spiral motifs.

For each pillow front:

Make two spiral motifs.

Block both motifs.

Join them side by side.

Work around the joined pair using chain spaces and stitch groups.

Shape the outer rounds into a rectangle.

Add decorative corner sections.

Continue until the panel matches the pillow form.

Create a plain crochet or fabric back.

Join the front and back around three sides.

Insert the pillow form.

Close the final side with a zipper, buttons, or crochet ties.

CUSTOMIZATION IDEAS

COASTAL VERSION

Use turquoise, ivory, and sand-colored details.

DEEP OCEAN VERSION

Use navy, teal, and pale aqua.

TROPICAL VERSION

Use turquoise and coral with a cream border.

MINIMALIST VERSION

Use ivory for the entire motif and allow the stitch direction to define the spiral.

OMBRE VERSION

Begin with pale aqua motifs and gradually introduce deeper turquoise toward the foot of the bed.

SCRAP-YARN VERSION

Keep ivory consistent and use a different blue or green shade in every motif.

BRIDAL VERSION

Use ivory and pale aqua with a fine silver thread held alongside the border yarn.

COMMON MISTAKES AND HOW TO FIX THEM

MISTAKE 1: THE CENTER FORMS A BOWL

Cause:

There are too few increases or the hook is too small.

Solution:

Add increases to both color sections or use a larger hook.

MISTAKE 2: THE CENTER RUFFLES

Cause:

There are too many increases.

Solution:

Remove several increases from both sections.

MISTAKE 3: ONE COLOR IS WIDER

Cause:

The two sections contain different stitch counts.

Solution:

Count turquoise and ivory separately after every extension.

MISTAKE 4: THE SPIRAL IS NOT CLEAR

Cause:

The stitch-height transitions are abrupt or the colors are too similar.

Solution:

Use gradual stitch-height changes and choose colors with stronger contrast.

MISTAKE 5: A GAP APPEARS AT THE COLOR BOUNDARY

Cause:

The first or final stitch was worked loosely.

Solution:

Tighten the boundary stitches or close the opening with a matching yarn tail.

MISTAKE 6: THE INACTIVE LOOP UNRAVELS

Cause:

The loop was left unsecured.

Solution:

Enlarge the loop and place a locking marker through it.

MISTAKE 7: THE YARNS TANGLE

Cause:

The two strands repeatedly cross.

Solution:

Keep one yarn ball on each side and rotate the motif instead of moving the balls.

MISTAKE 8: THE OPENWORK PULLS INWARD

Cause:

The chains are too short.

Solution:

Add one chain to every arch.

MISTAKE 9: THE BORDER RUFFLES

Cause:

The arches are too long or contain too many stitches.

Solution:

Shorten the chains or reduce the number of stitches in each scallop.

MISTAKE 10: THE MOTIFS HAVE DIFFERENT SIZES

Cause:

The tension or stitch count changed.

Solution:

Measure every motif and use one blocking template for all of them.

MISTAKE 11: THE JOINED BEDSPREAD BUCKLES

Cause:

The connections are too tight.

Solution:

Use looser joins, a larger hook, or longer chain bridges.

MISTAKE 12: THE GAPS BETWEEN MOTIFS ARE TOO LARGE

Cause:

The motifs are connected at too few points.

Solution:

Add more joining points or insert small filler flowers.

MISTAKE 13: THE BEDSPREAD FEELS TOO HEAVY

Cause:

The yarn is too thick or the solid centers are too large.

Solution:

Use lighter yarn, fewer solid rounds, or make a smaller blanket.

MISTAKE 14: THE OUTER BORDER WAVES

Cause:

Too many stitches were added.

Solution:

Remove several stitches and decrease where two motifs meet.

MISTAKE 15: THE SPIRALS FACE THE WRONG DIRECTIONS

Cause:

The layout was not planned before joining.

Solution:

Mark the top of every motif and photograph the arrangement.

WEAVING IN THE ENDS

Thread each yarn end onto a yarn needle.

Weave it through stitches of the same color.

Change direction at least once.

Do not carry turquoise behind an ivory section because the darker yarn may show through.

Leave tails at least 5 inches long before weaving.

Finish the ends after each batch of motifs instead of waiting until the entire bedspread is assembled.

BLOCKING THE COMPLETED BEDSPREAD

Wash the bedspread gently in cool or lukewarm water.

Use mild detergent.

Support the weight of the wet crochet with both hands.

Do not lift it by one corner.

Gently press out the water.

Roll the bedspread inside several large towels.

Arrange it on blocking mats, a clean floor, or a spare bed covered with towels.

Straighten the rows and columns.

Shape the outer border.

Open the chain spaces with your fingers.

Measure the width and length.

Allow the bedspread to dry completely.

CARE INSTRUCTIONS

Hand washing is recommended.

If the yarn label permits machine washing:

Use cold water.

Choose a gentle cycle.

Use mild detergent.

Avoid chlorine bleach.

Place the bedspread in a large laundry bag if possible.

Do not tumble dry on high heat.

Dry flat or support the bedspread evenly.

Never hang the bedspread while it is wet because the weight may stretch the motifs and seams.

Store it clean and completely dry.

Fold it loosely and change the fold lines occasionally.

FREQUENTLY ASKED QUESTIONS

CAN A BEGINNER MAKE THIS BEDSPREAD?

The full project is best for an intermediate crocheter. A confident beginner can practice by making one motif as a decorative mat.

HOW LONG DOES IT TAKE?

A large bedspread may take several weeks or months. The total time depends on the motif count and your crochet schedule.

HOW MANY MOTIFS DO I NEED?

Make and block one motif, then measure it. Use the blocked and joined dimensions to calculate the required number.

CAN I USE ACRYLIC YARN?

Yes. Acrylic creates a lighter and warmer bedspread but may not hold the lace shape as sharply as cotton.

CAN I USE WORSTED-WEIGHT YARN?

Yes. The motifs will be larger and heavier, so fewer motifs will be required.

CAN I USE CROCHET THREAD?

Yes. Crochet thread creates delicate heirloom lace, but the project will require more motifs and more time.

DO I HAVE TO USE TURQUOISE AND IVORY?

No. Any two contrasting colors can be used.

WHY DOES MY MOTIF LOOK DIFFERENT FROM THE PHOTO?

This guide is reconstructed from the visible design. It creates a similar two-color spiral rather than reproducing an unavailable original pattern exactly.

SHOULD I BLOCK BEFORE JOINING?

Yes. Block every motif individually before assembly, then block the completed bedspread again.

WHAT IS THE EASIEST JOINING METHOD?

Whip stitching is straightforward and allows all motifs to be arranged before assembly.

WHAT IS THE MOST DECORATIVE JOIN?

The chain-bridge join complements the open lace surrounding each spiral.

CAN I MAKE A RECTANGULAR BEDSPREAD WITH CIRCULAR MOTIFS?

Yes. Arrange the motifs in straight rows, add filler flowers, and crochet a rectangular border around the complete piece.

CAN I MAKE ONE MOTIF ONLY?

Yes. One motif can become a decorative mat, coaster, wall decoration, bag panel, or cushion appliqué.

HOW CAN I MAKE A SMALLER MOTIF?

Use finer yarn, a smaller hook, or stop the solid center after fewer extensions.

HOW CAN I MAKE A LARGER MOTIF?

Continue the increase formula for additional extensions before adding the lace.

CAN I SELL FINISHED ITEMS MADE FROM THIS GUIDE?

You may generally sell physical items crocheted using this photo-inspired guide. Use your own photographs and do not claim that the reconstruction is the exact original pattern from the reference image.

QUICK PATTERN SUMMARY

  1. Place turquoise and ivory stitches in the same center ring.
  2. Keep both yarn loops active.
  3. Extend turquoise across the ivory stitches.
  4. Extend ivory across the turquoise stitches.
  5. Alternate between both colors.
  6. Increase evenly in every extension.
  7. Continue until the solid center reaches the desired size.
  8. Taper both colored sections.
  9. Work a stabilizing sc round.
  10. Add the first open chain-space round.
  11. Crochet tall radiating stitches.
  12. Add decorative chain arches.
  13. Finish with scallops, clusters, or picots.
  14. Block the first motif.
  15. Make the required number of matching motifs.
  16. Arrange the spiral directions.
  17. Join the motifs in rows.
  18. Add filler flowers if desired.
  19. Crochet the outer bedspread border.
  20. Wash and block the finished project.

FINAL THOUGHTS

This turquoise and ivory spiral crochet bedspread brings together bold color, flowing curves, and delicate lace. The vibrant turquoise gives the design a fresh coastal character, while the ivory softens the overall appearance and highlights the spiral movement.

A large motif bedspread requires patience, but the project becomes much more manageable when completed in stages. Begin with one carefully measured sample, then make the remaining motifs in small batches.

Accurate counting, consistent tension, careful joining, and thorough blocking will transform the individual circles into a dramatic handmade bedspread. Matching pillow covers can complete the set and create a coordinated bedroom filled with texture and color.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *