|

BLUSH PINK SPIRAL LACE CROCHET BEDSPREAD

Free Photo-Inspired Motif Pattern and Assembly Guide

INTRODUCTION

Romantic, detailed, and full of graceful movement, this blush pink spiral crochet bedspread is a beautiful statement piece for a cozy bedroom. It is created from repeated circular lace motifs featuring two interlocking shades of pink.

Each motif begins with a small center opening surrounded by two curved sections. One section is crocheted in soft blush pink, while the second is worked in a deeper rose shade. The colors sweep around each other to create a dramatic spiral.

The solid spiral center is framed by long radiating stitches, open chain arches, and small flower-like scallops. When many motifs are joined, they form a continuous lace arrangement that flows across the bed and drapes beautifully over the sides.

Although the completed bedspread looks complex, it can be approached one motif at a time. The individual circles are easy to carry and store, making this a wonderful long-term project.

ABOUT THIS PATTERN

This is a photo-inspired crochet reconstruction based on the visible colors, shapes, textures, and construction of the reference image. It is not the original designer’s exact pattern.

The instructions use a practical two-color spiral technique to create a similar effect. Because the design is reconstructed from a photograph, small adjustments may be required depending on your yarn, hook, tension, and desired motif size.

Make and block one complete test motif before beginning the full bedspread.

This pattern uses US crochet terminology.

PROJECT OVERVIEW

The bedspread is assembled from individual circular motifs.

Each motif contains:

A small open center

A light blush spiral section

A deeper rose spiral section

A solid circular middle

Long radiating openwork stitches

Decorative chain arches

A flower-like scalloped border

Joining points around the edge

The completed motifs can be joined while crocheting the final round or sewn together afterward.

Small chain bridges or filler flowers may be added in the open spaces between four neighboring motifs.

SKILL LEVEL

Intermediate to advanced

You should be comfortable with:

Working in rounds

Using two active yarn colors

Leaving live loops temporarily

Increasing evenly

Working with tall stitches

Working into chain spaces

Making clusters

Making picots and scallops

Joining crochet motifs

Blocking lace

Counting repeated stitch sections

FINISHED SIZE

Using sport-weight cotton yarn and a 3.5 mm hook, one blocked motif should measure approximately:

8 to 10 inches across

Approximate finished dimensions:

Baby blanket: 30 x 36 inches

Lap blanket: 40 x 50 inches

Throw blanket: 50 x 60 inches

Twin bedspread: 66 x 90 inches

Full bedspread: 80 x 96 inches

Queen bedspread: 90 x 100 inches

King bedspread: 108 x 100 inches

These dimensions are approximate. The final border may add several inches to the width and length.

MATERIALS

You will need:

Soft blush pink cotton or cotton-blend yarn

Deeper rose pink cotton or cotton-blend yarn

A 3 mm to 4 mm crochet hook

Scissors

Yarn needle

Measuring tape

Stitch markers in two different colors

Blocking mats

Rustproof blocking pins

Optional locking stitch holders

Optional row labels

Optional storage bags for finished motifs

Optional pale cream yarn for small highlights

YARN ESTIMATES

The total yarn requirement depends on the yarn weight, motif size, stitch tension, joining method, and border depth.

Approximate total yardage:

Baby blanket: 1,200 to 1,700 yards

Lap blanket: 1,800 to 2,500 yards

Throw blanket: 2,500 to 3,500 yards

Twin bedspread: 4,000 to 5,500 yards

Full bedspread: 5,000 to 7,000 yards

Queen bedspread: 6,000 to 8,500 yards

King bedspread: 7,500 to 10,000 yards

Purchase approximately equal amounts of blush and rose yarn.

Add 10 to 15 percent extra for joining, swatching, the outer border, and possible future repairs.

CHOOSING THE BEST YARN

Smooth cotton yarn is ideal for this lace bedspread.

Cotton provides:

Clear stitch definition

A crisp spiral shape

A stable blocked finish

Beautiful drape

Good durability

Easy care

Suitable yarn options include:

Sport-weight cotton

Light DK cotton

Mercerized cotton

Cotton and bamboo blend

Cotton and acrylic blend

Fine recycled cotton

Use sport-weight yarn for a lighter decorative bedspread. Choose DK yarn for a thicker and warmer blanket.

Avoid highly fuzzy yarn because it can hide the spiral lines and delicate border details.

HOOK SIZE

Choose a hook that produces smooth, flexible stitches.

Suggested combinations:

Sport-weight cotton: 3 mm to 3.5 mm hook

Light DK cotton: 3.5 mm to 4 mm hook

DK cotton: 4 mm to 4.5 mm hook

The motif should lie flat without feeling stiff.

If the center forms a bowl, use a larger hook or add more increases.

If the center ruffles, use a smaller hook or reduce the increases.

COLOR SUGGESTIONS

The reference bedspread uses two pink shades.

Recommended combinations include:

Blush pink and dusty rose

Pale pink and coral

Rose pink and burgundy

Peach and cream

Mauve and soft pink

Lavender and blush

Ivory and rose

Terracotta and pale peach

Raspberry and light pink

Plum and champagne

For a soft romantic effect, choose two shades from the same color family.

For a bolder spiral, use strongly contrasting colors.

ABBREVIATIONS

This pattern uses US crochet terms.

MR – Magic ring

Ch – Chain

Sl st – Slip stitch

Sc – Single crochet

Hdc – Half double crochet

Dc – Double crochet

Tr – Treble crochet

Inc – Increase

St – Stitch

Sts – Stitches

Sp – Space

Ch-sp – Chain space

Sk – Skip

Rnd – Round

Rep – Repeat

FO – Fasten off

SPECIAL STITCHES

DOUBLE CROCHET INCREASE

Work 2 dc in the same stitch.

DOUBLE CROCHET V-STITCH

Work 1 dc, ch 1, and 1 dc in the same stitch or space.

THREE-DOUBLE-CROCHET CLUSTER

Yarn over and insert the hook into the indicated stitch or space.

Yarn over and pull up a loop.

Yarn over and pull through two loops.

Repeat this process two more times in the same space.

Yarn over and pull through all remaining loops.

PICOT

Ch 3 and sl st into the first chain made.

SMALL SCALLOP

Work 1 sc, 3 dc, and 1 sc into the same space.

LARGE SCALLOP

Work 1 sc, 5 dc, and 1 sc into the same space.

FLOWER SCALLOP

Work 1 sc, ch 3, 3-dc cluster, ch 3, and 1 sc into the same space.

LONG CHAIN ARCH

Ch 7 to ch 10, then anchor the chain with a single crochet in the indicated space.

TWO-COLOR SPIRAL TECHNIQUE

Both colors remain attached during the construction of the center.

After completing one color section, enlarge its working loop and secure it with a locking stitch marker.

Return to the second color and continue crocheting.

Alternating between the two active yarns allows the sections to curve around one another.

GAUGE

Exact stitch gauge is less important than consistency.

One blocked motif should measure approximately 8 to 10 inches across.

Every motif in the same bedspread should have:

The same stitch counts

The same number of rounds

The same yarn weight

The same hook size

The same blocked diameter

PATTERN NOTES

Do not cut the yarn every time you change colors.

Use different stitch-marker colors for the two live loops.

Keep the inactive loop large enough that it cannot unravel.

Count each color section separately.

Complete the same increase sequence with both colors.

A small amount of curling before blocking is normal.

Make one complete sample before starting the remaining motifs.

PART ONE: BEGINNING THE SPIRAL CENTER

Create a loose magic ring with the deeper rose yarn.

With rose, work into the ring:

1 sc

1 hdc

2 dc

2 tr

Enlarge the rose working loop and secure it with a stitch marker.

Do not fasten off.

Join blush yarn in the same center ring immediately after the rose stitches.

With blush, work:

1 sc

1 hdc

2 dc

2 tr

Enlarge the blush loop and secure it with a second marker.

Pull the magic ring gently until a small decorative opening remains.

Each colored section should contain 6 stitches.

The progression from short stitches to tall stitches begins the spiral curve.

PART TWO: FIRST ROSE EXTENSION

Return the rose loop to the hook.

Work across the 6 blush stitches.

Work 2 dc in every blush stitch.

You should add 12 rose dc.

Stop when you reach the original rose section.

Enlarge the loop and secure it again.

PART THREE: FIRST BLUSH EXTENSION

Return the blush loop to the hook.

Work across the 6 original rose stitches.

Work 2 dc in every rose stitch.

You should add 12 blush dc.

Stop at the beginning of the new blush section.

Enlarge and secure the loop.

The two colors should now begin curling around the center.

PART FOUR: SECOND SPIRAL EXTENSION

With rose, work across the available blush stitches:

1 dc in the next stitch

2 dc in the following stitch

Repeat to the color boundary.

Secure the rose loop.

With blush, work across the available rose stitches:

1 dc in the next stitch

2 dc in the following stitch

Repeat to the color boundary.

Secure the blush loop.

PART FIVE: THIRD SPIRAL EXTENSION

With rose, repeat across the blush edge:

1 dc in each of the next 2 stitches

2 dc in the following stitch

Secure the loop.

With blush, repeat across the rose edge:

1 dc in each of the next 2 stitches

2 dc in the following stitch

Secure the loop.

PART SIX: FOURTH SPIRAL EXTENSION

With rose, repeat:

1 dc in each of the next 3 stitches

2 dc in the following stitch

Continue to the color boundary.

Secure the loop.

With blush, repeat:

1 dc in each of the next 3 stitches

2 dc in the following stitch

Continue to the color boundary.

Secure the loop.

PART SEVEN: FIFTH SPIRAL EXTENSION

With rose, repeat:

1 dc in each of the next 4 stitches

2 dc in the following stitch

Secure the loop.

With blush, repeat:

1 dc in each of the next 4 stitches

2 dc in the following stitch

Secure the loop.

The two sections should now resemble broad curved commas flowing around one another.

MAKING THE SOLID CENTER LARGER

Continue the established increase formula.

Next extension:

Work 1 dc in each of the next 5 stitches, then work 2 dc in the following stitch.

Following extension:

Work 1 dc in each of the next 6 stitches, then work 2 dc in the following stitch.

Increase the number of plain stitches between increases by one during each additional extension.

Complete every extension with both colors.

CREATING A MORE PRONOUNCED SPIRAL

To create a stronger curve, vary the stitch height near the color boundaries.

Begin a section with:

2 sc

2 hdc

Continue with dc across the middle.

Near the widest outer area, work:

2 or 3 tr

Finish with:

2 dc

2 hdc

1 sc

The gradual change in stitch height exaggerates the curl.

Keep the total stitch count consistent with the opposite-colored section.

PART EIGHT: TAPERING THE SPIRAL ENDS

When the solid center reaches approximately 5 to 6 inches across, taper each color.

With rose, work:

2 dc

2 hdc

2 sc

1 sl st

Fasten off rose.

With blush, work:

2 dc

2 hdc

2 sc

1 sl st

Fasten off blush.

The two colored sections should now form a nearly circular center.

PART NINE: STABILIZING THE CENTER

Join rose yarn to any point around the outer edge.

Round 1:

Ch 1.

Work sc evenly around the complete spiral.

Place approximately one sc in the top of every stitch.

At each color transition, add one extra sc if needed to close a gap.

Join with a sl st.

Count the stitches.

Adjust the total to a multiple of 12.

A total of 96 stitches works well for a medium motif.

Round 2:

Ch 1.

Work 1 sc in every stitch around.

Join with a sl st.

This creates a stable foundation for the open lace.

PART TEN: FIRST OPENWORK ROUND

Continue with rose.

Round 3:

Ch 5. This counts as 1 dc and ch 2.

Skip the next stitch.

Work 1 dc in the following stitch.

Repeat around:

Ch 2, skip 1 stitch, dc in the next stitch.

Join with a sl st in the third chain of the beginning chain.

If the round pulls inward, use ch 3 instead of ch 2.

PART ELEVEN: RADIATING STITCH ROUND

Round 4:

Sl st into the first ch-2 space.

Ch 6. This counts as 1 tr and ch 2.

Work 1 tr in the same space.

In every remaining ch-2 space, work:

1 tr, ch 2, 1 tr.

Join with a sl st in the fourth chain of the beginning chain.

These tall stitches form the long radiating openings visible around the spiral.

PART TWELVE: INNER CHAIN ARCHES

Round 5:

Sl st into the first ch-2 space.

Work 1 sc in the space.

Ch 5.

Work 1 sc in the next ch-2 space.

Repeat around:

Ch 5, sc in the next space.

Join with a sl st.

Fasten off rose.

PART THIRTEEN: BLUSH LACE ROUND

Join blush yarn in any ch-5 space.

Round 6:

In every ch-5 space, work:

1 sc, ch 5, 1 sc.

Repeat around.

Join with a sl st.

Round 7:

Sl st into the first ch-5 space.

Work 5 sc into every ch-5 space.

Join with a sl st.

This gives the openwork a neat blush outline.

PART FOURTEEN: LARGE OUTER LOOPS

Continue with blush.

Round 8:

Ch 1 and work 1 sc in the first stitch.

Ch 7.

Skip the next 4 stitches.

Work 1 sc in the following stitch.

Repeat around.

Join with a sl st.

If the repeat does not divide evenly, adjust one or two spaces near a color boundary.

Round 9:

Sl st into the first ch-7 space.

Work 9 sc into every ch-7 space around.

Join with a sl st.

PART FIFTEEN: FLOWER-LIKE SCALLOPED EDGE

Continue with blush.

Round 10:

In the first arch, work:

1 sc

3 dc

Picot

3 dc

1 sc

Repeat the same sequence in every arch around.

Join with a sl st.

Fasten off.

ALTERNATIVE ROUNDED SCALLOP

For a simpler edge, work:

1 sc, 5 dc, 1 sc

into every arch.

ALTERNATIVE FLORAL BOBBLE

For small rounded flowers like those visible in the reference image, work:

1 sc, ch 3, 3-dc cluster, ch 3, 1 sc

into every arch.

HALF-AND-HALF OUTER BORDER

To continue the two-color spiral through the open lace:

Work half of each lace round in rose.

Secure the rose loop at the spiral boundary.

Join blush at the same boundary.

Work the other half of the round in blush.

Join the colors at both boundaries.

Repeat this method for every lace round.

This version produces a stronger continuous spiral but creates additional yarn ends.

CHECKING THE FINISHED MOTIF

Lay the motif on a flat surface.

Check that:

The center opening is neat.

Both colors contain similar amounts of fabric.

The spiral curves smoothly.

The motif lies reasonably flat.

The tall stitches are evenly spaced.

The chain arches are equal in size.

The scallops have matching shapes.

The border includes clear joining points.

Small irregularities can usually be corrected during blocking.

BLOCKING THE TEST MOTIF

Soak the motif in lukewarm water for 10 to 15 minutes.

Press out the excess water gently.

Do not twist or wring it.

Roll the motif inside a clean towel.

Place it on a blocking mat.

Pin the center first.

Arrange the two spiral sections.

Stretch the openwork evenly.

Pin the outer scallops at equal distances.

Measure across the motif in several directions.

Adjust the pins until the shape is circular.

Allow the motif to dry completely.

Record its blocked diameter.

CALCULATING THE NUMBER OF MOTIFS

Make three motifs and join them in one sample row.

Measure the actual joined width.

Divide the desired bedspread width by the width of one joined motif.

Divide the desired length by the joined motif height.

Add more motifs if you want a deep overhang around the bed.

SUGGESTED MOTIF COUNTS

Small throw:

5 motifs across

6 motifs down

30 motifs total

Large throw:

6 motifs across

7 motifs down

42 motifs total

Twin bedspread:

7 motifs across

10 motifs down

70 motifs total

Full bedspread:

9 motifs across

10 motifs down

90 motifs total

Queen bedspread:

10 motifs across

11 motifs down

110 motifs total

King bedspread:

12 motifs across

11 motifs down

132 motifs total

Adjust the counts according to your motif dimensions.

PLANNING THE MOTIF DIRECTION

Place all motifs on a clean floor or bed before joining.

SAME DIRECTION

Position every spiral in the same direction for a continuous flowing appearance.

ALTERNATING DIRECTION

Rotate every second motif 180 degrees to create a mirrored design.

DIAGONAL DIRECTION

Rotate the motifs gradually across each row to produce diagonal movement.

RANDOM DIRECTION

Turn the motifs in different directions for a playful handmade arrangement.

Photograph the selected layout before moving the motifs.

JOIN-AS-YOU-GO METHOD

Complete the first motif.

On the second motif, begin the final scallop round.

At each joining point:

Work half of the scallop.

Ch 1.

Sl st into the corresponding scallop on the first motif.

Ch 1.

Complete the scallop on the second motif.

Join neighboring motifs at three to five evenly spaced points.

Do not connect every stitch because the blanket should remain flexible.

WHIP-STITCH JOIN

Block all motifs to the same measurement.

Place two motifs with the right sides facing.

Thread matching yarn onto a yarn needle.

Sew through corresponding outer loops.

Keep the sewing stitches relaxed.

Open the motifs and check the seam.

This creates a flexible, nearly invisible join.

SLIP-STITCH JOIN

Place two motifs with the wrong sides together.

Insert the hook through a matching loop from each motif.

Yarn over and pull through both loops and the loop on the hook.

Continue across the joining section.

Use a slightly larger hook if the seam feels tight.

CHAIN-BRIDGE JOIN

Attach yarn to an outer scallop of the first motif.

Ch 3.

Sl st into the corresponding scallop on the second motif.

Ch 3.

Sl st into the next scallop on the first motif.

Continue alternating between the motifs.

This join preserves the light, open character of the lace.

FILLING THE GAPS BETWEEN MOTIFS

Four joined circular motifs leave a small central opening.

You may leave the opening uncovered or add a filler flower.

SMALL FILLER FLOWER

Make a magic ring.

Round 1:

Work 8 sc into the ring.

Join with a sl st.

Round 2:

Ch 5 and work 1 sc in the next stitch.

Repeat around.

You should have 8 loops.

At four evenly spaced loops, join the filler to the surrounding motifs.

Fasten off.

FOUR-WAY CHAIN CONNECTOR

Join yarn to one motif.

Ch 5 and sl st into the second motif.

Ch 5 and sl st into the third motif.

Ch 5 and sl st into the fourth motif.

Ch 5 and join to the starting point.

Work one small scallop into every chain space if desired.

OUTER BEDSPREAD BORDER

After joining all motifs, work around the entire bedspread.

BORDER ROUND 1

Join rose yarn at any outer corner.

Ch 1.

Work sc evenly around.

At every corner, work:

2 sc, ch 2, 2 sc.

Where two motifs meet, work a decrease if the stitches appear crowded.

Join with a sl st.

BORDER ROUND 2

Ch 4. This counts as 1 dc and ch 1.

Skip 1 stitch.

Work 1 dc in the next stitch.

Repeat around:

Ch 1, skip 1 stitch, dc in the next stitch.

At every corner, work:

1 dc, ch 2, 1 dc.

Join with a sl st.

BORDER ROUND 3

Change to blush.

Sl st into the first ch-1 space.

Work 1 sc in the space.

Ch 4.

Work 1 sc in the next ch-1 space.

Repeat around.

At each corner, use ch 6 instead of ch 4.

Join with a sl st.

BORDER ROUND 4

Work 5 sc into every ch-4 space.

In each corner ch-6 space, work:

5 sc, ch 2, 5 sc.

Join with a sl st.

BORDER ROUND 5

Change to rose.

In each arch, work:

1 sc, 3 dc, picot, 3 dc, 1 sc.

Repeat around.

Add an extra ch 2 between corner scallops if needed.

Join and fasten off.

OPTIONAL DEEP LACE BORDER

For a wider decorative overhang, add:

One round of ch-5 loops

One round of tall V-stitches

One round of ch-7 loops

One round of sc over the loops

One final round of floral scallops

Alternate blush and rose between the rounds.

MAKING A MATCHING PILLOW COVER

Create one large spiral motif for the center.

Work several square-shaping rounds around it.

Use chain spaces and stitch groups to form four corners.

Continue until the panel matches the cushion size.

Add a wide blush and rose border.

Block the front panel.

Make a plain crochet or fabric back.

Place the front and back together.

Join around three sides.

Insert the cushion form.

Close the remaining side with buttons, crochet ties, or a zipper.

CUSTOMIZATION IDEAS

MONOCHROME PINK

Use one shade for the entire bedspread. The spiral will remain visible through the changing stitch direction.

THREE-SHADE VERSION

Use pale pink for the center, rose for the middle, and raspberry for the outer border.

CREAM HIGHLIGHTS

Work the final scallops and filler flowers in cream.

OMBRE BEDSPREAD

Use pale blush motifs at the top and gradually introduce darker rose shades toward the foot.

SCRAP-YARN VERSION

Keep blush consistent and use a different pink or purple shade for each second spiral section.

BRIDAL VERSION

Use ivory and blush yarn with a fine metallic strand held together during the final border.

MODERN VERSION

Use dusty rose and charcoal gray with a simple outer edge.

COMMON MISTAKES AND HOW TO FIX THEM

MISTAKE 1: THE CENTER FORMS A BOWL

Cause:

There are too few increases or the hook is too small.

Solution:

Add more increases to both sections or use a larger hook.

MISTAKE 2: THE CENTER RUFFLES

Cause:

There are too many increases.

Solution:

Remove several increases from both colored sections.

MISTAKE 3: ONE COLOR IS WIDER THAN THE OTHER

Cause:

The stitch counts differ.

Solution:

Count each color section separately after every extension.

MISTAKE 4: THE SPIRAL IS NOT CLEAR

Cause:

The two shades are too similar or the stitch heights change abruptly.

Solution:

Choose colors with greater contrast and use a gradual transition between short and tall stitches.

MISTAKE 5: THERE IS A GAP AT THE COLOR CHANGE

Cause:

The first or final stitch was worked loosely.

Solution:

Tighten the boundary stitches or close the opening later with a matching yarn tail.

MISTAKE 6: AN INACTIVE LOOP UNRAVELS

Cause:

It was left unsecured.

Solution:

Enlarge the loop and place a locking stitch marker through it.

MISTAKE 7: THE YARN BALLS BECOME TANGLED

Cause:

The strands repeatedly cross.

Solution:

Keep one yarn ball on each side and rotate the motif rather than moving the balls.

MISTAKE 8: THE OPENWORK PULLS INWARD

Cause:

The chains are too short.

Solution:

Add one chain to each space.

MISTAKE 9: THE OUTER EDGE RUFFLES

Cause:

The arches are too long or the scallops contain too many stitches.

Solution:

Shorten the arches or reduce the number of dc in each scallop.

MISTAKE 10: THE MOTIFS ARE DIFFERENT SIZES

Cause:

The tension, hook, or stitch count changed.

Solution:

Measure every motif and use the same blocking template.

MISTAKE 11: THE JOINED BEDSPREAD BUCKLES

Cause:

The joins are too tight.

Solution:

Use looser stitches, a larger hook, or longer chain bridges.

MISTAKE 12: THE GAPS BETWEEN MOTIFS ARE TOO LARGE

Cause:

The motifs are joined at too few points.

Solution:

Add more joining points or use filler flowers.

MISTAKE 13: THE BEDSPREAD IS TOO HEAVY

Cause:

The yarn is too thick or the solid centers are too large.

Solution:

Use sport-weight yarn, shorten the solid section, or make a smaller throw.

MISTAKE 14: THE OUTER BORDER WAVES

Cause:

Too many stitches were added.

Solution:

Remove several stitches and work decreases where motifs meet.

MISTAKE 15: THE SPIRALS FACE THE WRONG DIRECTIONS

Cause:

The layout was not marked before joining.

Solution:

Mark the top of every motif and photograph the arrangement.

WEAVING IN THE ENDS

Thread each yarn tail onto a yarn needle.

Weave it through stitches of the same color.

Change direction at least once.

Avoid carrying rose yarn behind a pale blush section because the darker color may show.

Leave tails at least 5 inches long.

Weave in the ends after finishing each group of motifs rather than waiting until the complete bedspread is assembled.

BLOCKING THE COMPLETE BEDSPREAD

Wash the bedspread gently in cool or lukewarm water.

Use mild detergent.

Support the wet crochet with both hands.

Never lift it by one corner.

Press out the excess water gently.

Roll the bedspread inside several large towels.

Arrange it on blocking mats, a clean floor, or a spare bed covered with towels.

Straighten all rows and columns.

Shape the outer border.

Open the lace spaces with your fingers.

Measure the width and length.

Allow the bedspread to dry completely.

CARE INSTRUCTIONS

Hand washing is recommended.

If the yarn label permits machine washing:

Use cold water.

Select a gentle cycle.

Use mild detergent.

Avoid chlorine bleach.

Place the bedspread inside a large mesh laundry bag if possible.

Do not tumble dry on high heat.

Dry flat or support the bedspread evenly.

Never hang it while wet because the weight of the water can stretch the motifs and joining seams.

Store the bedspread clean and completely dry.

Fold it loosely and change the fold lines occasionally.

FREQUENTLY ASKED QUESTIONS

CAN A BEGINNER MAKE THIS BEDSPREAD?

The full bedspread is best for an intermediate crocheter. A confident beginner can practice by making one motif as a table mat.

HOW LONG WILL IT TAKE?

A large bedspread may require several weeks or months. The total time depends on the motif count and how many hours you crochet each day.

HOW MANY MOTIFS DO I NEED?

Make and block one motif, then measure it. Divide the desired bedspread dimensions by the joined motif dimensions.

CAN I USE ACRYLIC YARN?

Yes. Acrylic creates a lighter and warmer bedspread, but it may not hold the blocked lace as sharply as cotton.

CAN I USE WORSTED-WEIGHT YARN?

Yes, but the motifs will be larger and heavier. Use fewer motifs and a larger hook.

CAN I USE CROCHET THREAD?

Yes. Crochet thread creates delicate heirloom lace but requires more motifs and considerably more time.

DO I HAVE TO USE TWO SHADES OF PINK?

No. Any two contrasting colors can be used.

WHY DOES MY MOTIF NOT LOOK EXACTLY LIKE THE REFERENCE?

This guide is reconstructed from a photograph. It is designed to create a similar spiral-lace appearance rather than reproduce an unavailable original pattern exactly.

SHOULD I BLOCK BEFORE JOINING?

Yes. Block every motif individually, assemble the bedspread, and block the complete project again.

WHAT IS THE EASIEST JOIN?

Whip stitching is straightforward and allows you to arrange all motifs before assembly.

WHAT IS THE MOST DECORATIVE JOIN?

A chain-bridge join complements the open lace and creates attractive spaces between the circles.

CAN I MAKE A RECTANGULAR BEDSPREAD WITH ROUND MOTIFS?

Yes. Arrange the motifs in rows, fill the spaces between them, and add a rectangular outer border.

CAN I MAKE ONLY ONE MOTIF?

Yes. One motif can become a coaster, trivet, decorative mat, wall hanging, or cushion decoration.

HOW DO I MAKE A SMALLER MOTIF?

Use finer yarn, a smaller hook, or stop the solid spiral after fewer extensions.

HOW DO I MAKE A LARGER MOTIF?

Continue the increase sequence for additional extensions before beginning the openwork.

CAN I SELL FINISHED ITEMS MADE FROM THIS GUIDE?

You may generally sell the physical items you crochet using this photo-inspired guide. Use your own photographs and do not present the reconstruction as the exact original pattern from the reference image.

QUICK PATTERN SUMMARY

  1. Place rose and blush stitches inside the same center ring.
  2. Keep both working loops active.
  3. Extend rose across the blush stitches.
  4. Extend blush across the rose stitches.
  5. Alternate between both colors.
  6. Increase evenly during each extension.
  7. Continue until the solid spiral reaches the desired size.
  8. Taper both colored sections.
  9. Work a stabilizing sc round.
  10. Add an open chain-space round.
  11. Crochet tall radiating stitches.
  12. Add decorative chain arches.
  13. Finish with floral scallops or picots.
  14. Block the test motif.
  15. Make the required number of identical motifs.
  16. Arrange their spiral directions.
  17. Join them in rows.
  18. Add filler flowers if desired.
  19. Crochet an outer bedspread border.
  20. Wash and block the completed project.

FINAL THOUGHTS

This blush pink spiral lace crochet bedspread combines soft color, flowing movement, and delicate openwork in one memorable handmade design. The two interlocking pink sections form a graceful center, while the radiating stitches and floral scallops give every motif an elegant finish.

A large bedspread requires patience, but working one motif at a time makes the project much easier to manage. Begin with a carefully measured test piece, establish a comfortable rhythm, and complete the remaining motifs in small batches.

Consistent tension, careful counting, secure joining, and proper blocking will transform the separate circles into a dramatic bedspread that can become the centerpiece of an entire bedroom.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *