COASTAL TEARDROP CROCHET BEDSPREAD
Free Photo-Inspired Blue Eye Motif Pattern and Assembly Guide
INTRODUCTION
Inspired by ocean colors and traditional protective-eye designs, this coastal crochet bedspread is made from striking teardrop-shaped motifs in navy, turquoise, royal blue, and warm ivory.
Each motif begins with a dark circular center surrounded by graduating rings of blue. The center expands into a large pointed teardrop, followed by an open ivory lace border with rounded scallops. When the motifs are joined, the cream-colored spaces create a delicate lattice across the bedspread.
The finished design is bold but balanced. The dark center draws the eye inward, the turquoise adds brightness, the royal blue defines the teardrop, and the ivory lace softens the entire composition.
You can use the motif to make a full bedspread, a smaller throw, matching pillow covers, a wall hanging, a table runner, or an individual decorative mat.
ABOUT THIS PATTERN
This is a photo-inspired crochet reconstruction based on the visible colors, shapes, proportions, and textures of the reference design. It is not the original designer’s exact pattern.
The instructions provide a practical method for creating a similar layered teardrop motif. Some stitch counts may need to be adjusted according to your yarn, hook, tension, and desired finished size.
Make and block one complete sample motif before beginning the full bedspread.
This pattern uses US crochet terminology.
PROJECT OVERVIEW
The project is constructed from separate teardrop motifs.
Each motif includes:
A small dark navy center
A bright turquoise inner ring
A deeper aqua or teal ring
An ivory contrast ring
A royal-blue outer body
A pointed upper tip
An open ivory lace frame
Rounded scallops
Joining points around the outer edge
The motifs are arranged in alternating rows. Some can point upward while others point downward, creating a balanced repeating pattern.
Small chain bridges or filler flowers connect the open spaces between neighboring motifs.
SKILL LEVEL
Intermediate
You should be comfortable with:
Working in rounds
Increasing evenly
Working different stitch heights
Changing colors
Creating a pointed corner
Working into chain spaces
Making picots and scallops
Joining motifs
Counting stitches
Blocking lace
FINISHED SIZE
Using sport-weight cotton and a 3.5 mm hook, one blocked motif should measure approximately:
8 to 10 inches tall
6 to 8 inches wide
Approximate finished project sizes:
Baby blanket: 30 x 36 inches
Lap blanket: 40 x 50 inches
Throw blanket: 50 x 60 inches
Twin bedspread: 66 x 90 inches
Full bedspread: 80 x 96 inches
Queen bedspread: 90 x 100 inches
King bedspread: 108 x 100 inches
The final measurements depend on the motif size, arrangement, joining spaces, and outer border.
MATERIALS
You will need:
Dark navy cotton or cotton-blend yarn
Bright turquoise yarn
Medium aqua or teal yarn
Royal-blue yarn
Warm ivory or cream yarn
A 3 mm to 4 mm crochet hook
Scissors
Yarn needle
Measuring tape
Stitch markers
Blocking mats
Rustproof blocking pins
Optional row labels
Optional small clips for organizing motifs
Optional coordinating fabric for pillow backs
YARN ESTIMATES
The exact amount depends on the finished size, yarn weight, motif dimensions, and border depth.
Approximate total yardage:
Baby blanket: 1,300 to 1,800 yards
Lap blanket: 2,000 to 2,700 yards
Throw blanket: 2,700 to 3,800 yards
Twin bedspread: 4,200 to 5,800 yards
Full bedspread: 5,300 to 7,200 yards
Queen bedspread: 6,500 to 8,800 yards
King bedspread: 8,000 to 10,500 yards
Ivory will generally be used in the greatest quantity because it forms the joining lace and outer border.
Add 10 to 15 percent extra for swatching, joining, repairs, and gauge differences.
CHOOSING THE BEST YARN
Smooth cotton yarn is recommended for this design.
Cotton provides:
Crisp stitch definition
A stable teardrop shape
A clearly defined pointed tip
Excellent blocking results
A breathable finished bedspread
Good durability
Suitable yarn options include:
Sport-weight cotton
Light DK cotton
Mercerized cotton
Cotton and bamboo blend
Cotton and acrylic blend
Fine recycled cotton
Use sport-weight yarn for a delicate decorative bedspread. Choose DK yarn for a warmer and more substantial cover.
Avoid very fuzzy yarn because it may hide the layered color rings and small lace details.
HOOK SIZE
Suggested hook sizes:
Sport-weight cotton: 3 mm to 3.5 mm
Light DK cotton: 3.5 mm to 4 mm
DK cotton: 4 mm to 4.5 mm
The motif should lie flat without becoming stiff.
If the center curls into a bowl, use a larger hook or add more increases.
If the motif ruffles, use a smaller hook or reduce the number of increases.
COLOR PALETTE
The reference design uses a coastal palette:
Dark navy
Turquoise
Aqua
Royal blue
Warm ivory
Alternative combinations include:
Black, teal, turquoise, and white
Midnight blue, sky blue, and cream
Emerald, sage, ivory, and gold
Purple, lavender, white, and charcoal
Burgundy, blush, cream, and brown
Mustard, rust, beige, and dark brown
Coral, peach, ivory, and navy
For a classic protective-eye appearance, keep the center very dark and surround it with progressively lighter blues.
ABBREVIATIONS
This pattern uses US terms.
MR – Magic ring
Ch – Chain
Sl st – Slip stitch
Sc – Single crochet
Hdc – Half double crochet
Dc – Double crochet
Tr – Treble crochet
Dtr – Double treble crochet
Inc – Increase
St – Stitch
Sts – Stitches
Sp – Space
Ch-sp – Chain space
Sk – Skip
Rnd – Round
Rep – Repeat
FO – Fasten off
SPECIAL STITCHES
PICOT
Ch 3 and sl st into the first chain made.
V-STITCH
Work 1 dc, ch 1, and 1 dc in the same stitch or space.
THREE-DOUBLE-CROCHET CLUSTER
Yarn over and insert the hook into the indicated space.
Yarn over and pull up a loop.
Yarn over and pull through two loops.
Repeat the partial dc twice more in the same space.
Yarn over and pull through all loops.
SMALL SCALLOP
Work 1 sc, 3 dc, and 1 sc into the same space.
LARGE SCALLOP
Work 1 sc, 5 dc, and 1 sc into the same space.
POINTED CORNER
Work 2 dc, ch 2, and 2 dc into the marked point.
For a sharper tip, use:
2 tr, ch 3, 2 tr.
GAUGE
Exact gauge is less important than consistency.
One blocked motif should measure approximately 8 to 10 inches tall.
All motifs used in the same bedspread should have:
The same yarn weight
The same hook size
The same stitch count
The same number of rounds
The same blocked dimensions
PATTERN NOTES
The motif begins in the center and is worked outward.
The first rounds form a circle.
One marked stitch becomes the pointed top.
Additional increases are placed along the rounded lower section.
The top corner is emphasized during every shaping round.
Join each round with a slip stitch unless instructed otherwise.
Move the top marker upward after every round.
Block the sample motif before calculating the number required.
PART ONE: DARK NAVY CENTER
Use dark navy yarn.
Round 1:
Make a magic ring.
Ch 2. This does not count as a stitch.
Work 12 dc into the ring.
Pull the ring closed, leaving a tiny decorative opening if desired.
Join with a sl st to the first dc.
You should have 12 stitches.
Round 2:
Ch 2.
Work 2 dc in every stitch around.
Join with a sl st.
You should have 24 stitches.
Fasten off navy.
This dark circle creates the pupil-like center of the motif.
PART TWO: TURQUOISE INNER RING
Join bright turquoise yarn in any stitch.
Round 3:
Ch 2.
Repeat around:
1 dc in the next stitch
2 dc in the following stitch
Join with a sl st.
You should have 36 stitches.
Round 4:
Ch 2.
Repeat around:
1 dc in each of the next 2 stitches
2 dc in the following stitch
Join with a sl st.
You should have 48 stitches.
Fasten off turquoise.
The motif should still be circular at this stage.
PART THREE: AQUA TRANSITION RING
Join medium aqua or teal yarn.
Place a stitch marker in one stitch. This marked stitch will become the pointed top.
Round 5:
Ch 2.
Work 1 dc in each of the next 3 stitches and 2 dc in the following stitch.
Repeat around until you reach the marked top stitch.
In the marked stitch, work:
2 dc, ch 2, 2 dc.
Continue the established increase sequence around the remaining stitches.
Join with a sl st.
Move the stitch marker into the ch-2 point.
The circle will begin extending upward.
PART FOUR: SHAPING THE TEARDROP
Continue with aqua.
Round 6:
Ch 2.
Work dc around the first side.
Distribute increases approximately every 5 stitches along the curved lower portion.
In the marked top ch-2 space, work:
2 tr, ch 2, 2 tr.
Continue working dc around the second side.
Distribute the same number of increases on both sides.
Join with a sl st.
Fasten off aqua.
The motif should now have one defined point and one wide rounded bottom.
SHAPING GUIDELINE
Place more increases around the lower half than along the upper sides.
The upper sides should gradually narrow toward the point.
If increases are placed evenly around every section, the motif will return to a circle.
PART FIVE: IVORY CONTRAST RING
Join ivory yarn at the lower center of the motif.
Round 7:
Ch 2.
Work 1 dc in every stitch around.
Place one dc increase at approximately six evenly spaced points around the rounded lower section.
Along the upper sides, work without increasing.
In the top ch-2 space, work:
2 tr, ch 3, 2 tr.
Join with a sl st.
Round 8:
Ch 1.
Work 1 sc in every stitch around.
In the top ch-3 space, work:
1 sc, ch 2, 1 sc.
Add four to six sc increases around the lower curve if needed.
Join with a sl st.
Fasten off ivory.
PART SIX: ROYAL-BLUE OUTER BODY
Join royal-blue yarn at the lower center.
Round 9:
Ch 2.
Work 1 dc in every stitch around.
Distribute six increases across the rounded lower section.
Work the upper sides evenly.
In the top point, work:
2 tr, ch 3, 2 tr.
Join with a sl st.
Round 10:
Ch 2.
Work 1 dc in every stitch around.
Distribute eight increases across the lower curve.
Work without increasing along the upper sides.
In the top space, work:
2 tr, ch 3, 2 tr.
Join with a sl st.
Round 11:
Ch 1.
Work 1 sc in every stitch around.
In the top space, work:
1 sc, ch 3, 1 sc.
Join with a sl st.
Fasten off royal blue.
CHECKING THE TEARDROP SHAPE
Place the motif on a flat surface.
The design should have:
One sharp upper point
Two gently sloping sides
A wide rounded bottom
A centered dark circle
Even color rings
If the point leans to one side, compare the stitch counts along both upper edges.
If the lower half looks flat, add increases around the bottom curve.
If the motif ruffles, remove several lower increases.
PART SEVEN: FIRST OPENWORK ROUND
Join ivory yarn at the top point.
Round 12:
Ch 5. This counts as 1 dc and ch 2.
Skip the next stitch.
Work 1 dc in the following stitch.
Repeat around:
Ch 2, skip 1 stitch, dc in the next stitch.
At the top point, work:
1 dc, ch 3, 1 dc.
Join with a sl st.
This round begins the open lace frame.
PART EIGHT: RADIATING LACE ROUND
Round 13:
Sl st into the first ch-2 space.
Ch 6. This counts as 1 tr and ch 2.
Work 1 tr in the same space.
In each remaining ch-2 space, work:
1 tr, ch 2, 1 tr.
In the top ch-3 space, work:
2 tr, ch 4, 2 tr.
Join with a sl st.
PART NINE: CHAIN-ARCH FRAME
Round 14:
Sl st into the first ch-2 space.
Work 1 sc in the space.
Ch 5.
Work 1 sc in the next ch-2 space.
Repeat around.
At the top point, use ch 7 instead of ch 5.
Join with a sl st.
Round 15:
Sl st into the first ch-5 space.
Work:
1 sc, ch 5, 1 sc
in every ch-5 space.
In the top ch-7 space, work:
1 sc, ch 7, 1 sc.
Join with a sl st.
PART TEN: SCALLOPED OUTER EDGE
Round 16:
Sl st into the first ch-5 space.
In every regular ch-5 space, work:
1 sc, 5 dc, 1 sc.
In the top ch-7 space, work:
1 sc, 4 dc, picot, 4 dc, 1 sc.
Repeat around.
Join with a sl st.
Fasten off.
The larger pointed scallop at the top helps preserve the teardrop shape.
ALTERNATIVE FLORAL EDGE
For a more decorative finish, work the following into each chain space:
1 sc
Ch 3
3-dc cluster
Ch 3
1 sc
At the top, place two clusters separated by a picot.
ALTERNATIVE SMALL LOOP EDGE
For a lighter border:
Work 1 sc in the first space.
Ch 4.
Work 1 sc in the same space.
Repeat in each space around.
PART ELEVEN: ADDING SURFACE DETAILS
The colored rings can be emphasized with surface slip stitches.
Join turquoise or royal-blue yarn at the back of the motif.
Insert the hook through the fabric along one color boundary.
Pull up a loop.
Work loose surface slip stitches around the ring.
Do not pull tightly.
Fasten off and hide the ends on the back.
This optional detail creates a sharper outline between the colored sections.
BLOCKING THE TEST MOTIF
Soak the finished motif in lukewarm water for 10 to 15 minutes.
Press out the excess water gently.
Do not wring it.
Roll the motif inside a clean towel.
Place it on a blocking mat.
Pin the dark center first.
Pin the top point.
Pin the bottom center.
Pin both sides at matching positions.
Shape the openwork arches.
Pin the outer scallops.
Measure both sides to confirm that they are equal.
Allow the motif to dry completely.
Record the blocked height and width.
CALCULATING THE NUMBER OF MOTIFS
Make and block several motifs.
Join three motifs in a sample row.
Measure the joined width and height.
Divide the desired bedspread width by the joined motif width.
Divide the desired length by the joined row height.
Add additional motifs if you want the bedspread to hang over the sides and foot of the bed.
SUGGESTED LAYOUTS
Small throw:
5 motifs across
6 motifs down
Approximately 30 motifs
Large throw:
6 motifs across
7 motifs down
Approximately 42 motifs
Twin bedspread:
7 motifs across
10 motifs down
Approximately 70 motifs
Full bedspread:
8 to 9 motifs across
10 motifs down
Approximately 80 to 90 motifs
Queen bedspread:
9 to 10 motifs across
11 motifs down
Approximately 99 to 110 motifs
King bedspread:
11 to 12 motifs across
11 motifs down
Approximately 121 to 132 motifs
The exact count depends on the motif arrangement and overlap created by the joining method.
PLANNING THE MOTIF DIRECTION
ALL POINTS FACING UP
This creates orderly vertical rows.
ALTERNATING UP AND DOWN
Turn every second motif upside down.
The points fit between the rounded bottoms, creating a denser arrangement.
DIAGONAL LAYOUT
Shift each row slightly to create diagonal movement.
MIXED LAYOUT
Alternate upright motifs with horizontal or inverted motifs for a more artistic design.
Arrange the complete layout on a clean floor or bed and take a photograph before joining.
JOIN-AS-YOU-GO METHOD
Complete the first motif.
On the second motif, begin the final scallop round.
At each planned connection:
Work half of the scallop.
Ch 1.
Sl st into the corresponding scallop of the first motif.
Ch 1.
Complete the scallop.
Join each long side at three to five points.
Connect the top and bottom at one or two points.
Keep the joins loose enough that the motifs lie flat.
WHIP-STITCH JOIN
Block all motifs to the same measurements.
Place two motifs with the right sides together.
Thread ivory yarn onto a yarn needle.
Sew through matching outer loops.
Do not pull tightly.
Open the motifs and check that the seam lies flat.
This method creates a discreet, flexible connection.
SLIP-STITCH JOIN
Place two motifs with the wrong sides together.
Insert the hook through one loop from each motif.
Yarn over and pull through both loops and the loop on the hook.
Continue across the joining section.
Use a larger hook if the seam feels tight.
CHAIN-BRIDGE JOIN
Attach ivory yarn to one scallop.
Ch 3.
Sl st into the corresponding scallop on the neighboring motif.
Ch 3.
Return to the next scallop on the first motif.
Continue alternating between the two motifs.
The chain bridge creates an open lattice similar to the reference design.
FILLING THE SPACES BETWEEN MOTIFS
The teardrop shapes may leave small gaps when arranged in rows.
SMALL FILLER FLOWER
Make a magic ring.
Round 1:
Work 8 sc into the ring.
Join with a sl st.
Round 2:
Repeat four times:
Ch 5, sc in the next 2 stitches.
You should have four loops.
Join each loop to one surrounding motif.
Fasten off.
FOUR-WAY CHAIN CONNECTOR
Join yarn to the first motif.
Ch 5 and sl st into the second motif.
Ch 5 and sl st into the third motif.
Ch 5 and sl st into the fourth motif.
Ch 5 and join to the starting point.
Work one small cluster into each chain space.
PART TWELVE: STRAIGHTENING THE BEDSPREAD EDGES
The teardrop motifs can create an uneven outer edge.
Use half motifs, chain mesh, or additional border rounds to straighten it.
SIMPLE FILLING ROW
Join ivory yarn at one outer motif.
Work ch-5 arches across the gaps.
Anchor each arch to a nearby scallop.
On the next round, work 5 sc into each arch.
Repeat until the edge becomes reasonably straight.
Do not force the first border round into a perfectly straight line. Gradual shaping over two or three rounds creates a smoother result.
OUTER BEDSPREAD BORDER
BORDER ROUND 1
Join ivory yarn at any corner.
Ch 1.
Work sc evenly around the entire bedspread.
Use chain stitches to bridge deep spaces.
At every corner, work:
2 sc, ch 2, 2 sc.
Join with a sl st.
BORDER ROUND 2
Ch 4. This counts as 1 dc and ch 1.
Skip the next stitch.
Work 1 dc in the following stitch.
Repeat around:
Ch 1, skip 1 stitch, dc in the next stitch.
At each corner, work:
1 dc, ch 2, 1 dc.
Join with a sl st.
BORDER ROUND 3
Change to royal blue.
Sl st into the first ch-1 space.
Work 1 sc in the space.
Ch 4.
Work 1 sc in the next ch-1 space.
Repeat around.
Use ch 6 at the corners.
Join with a sl st.
BORDER ROUND 4
Change to ivory.
Work 5 sc into every ch-4 space.
At the corners, work:
5 sc, ch 2, 5 sc.
Join with a sl st.
BORDER ROUND 5
In each arch, work:
1 sc, 3 dc, picot, 3 dc, 1 sc.
Repeat around.
Join and fasten off.
OPTIONAL DEEP LACE BORDER
For a decorative overhang, add:
One round of ch-5 arches
One round of turquoise V-stitches
One round of ivory ch-7 loops
One round of royal-blue clusters
One final ivory scallop round
Keep the corners slightly larger during every round.
MAKING MATCHING PILLOW COVERS
The reference design includes square pillow covers with large central teardrop motifs.
To create one pillow front:
Make one full teardrop motif.
Block it.
Join royal-blue yarn around the lace border.
Mark four evenly spaced corner positions.
Work chain spaces between the scallops.
In every marked corner, work:
2 dc, ch 2, 2 dc.
Continue adding square-shaping rounds.
Alternate royal blue, ivory, and turquoise.
Stop when the panel matches the pillow form.
Add a decorative ivory scalloped border.
Make a plain crochet or fabric back.
Join the front and back around three sides.
Insert the pillow form.
Close the final side with buttons, ties, or a zipper.
CUSTOMIZATION IDEAS
CLASSIC PROTECTIVE-EYE VERSION
Use black in the center, followed by dark blue, turquoise, white, and royal blue.
COASTAL VERSION
Use navy, seafoam, aqua, and sand.
MINIMALIST VERSION
Use ivory and one shade of blue.
RAINBOW VERSION
Use a different color for every ring.
PASTEL VERSION
Use lavender, blush, mint, pale blue, and cream.
JEWEL-TONE VERSION
Use emerald, sapphire, amethyst, and gold.
OMBRE VERSION
Begin with navy and gradually move through teal, turquoise, aqua, and white.
MONOCHROME VERSION
Use one color throughout. The teardrop remains visible through stitch height and shaping.
COMMON MISTAKES AND HOW TO FIX THEM
MISTAKE 1: THE CENTER FORMS A BOWL
Cause:
There are too few increases or the hook is too small.
Solution:
Add more increases or use a larger hook.
MISTAKE 2: THE CENTER RUFFLES
Cause:
There are too many increases.
Solution:
Remove several increases from the circular rounds.
MISTAKE 3: THE POINT IS NOT SHARP
Cause:
The top space is too small or contains short stitches.
Solution:
Use treble stitches and a ch-3 or ch-4 point.
MISTAKE 4: THE POINT LEANS TO ONE SIDE
Cause:
The two upper sides have different stitch counts.
Solution:
Count the stitches from the bottom center to the point on both sides.
MISTAKE 5: THE LOWER EDGE IS FLAT
Cause:
There are too few increases along the bottom.
Solution:
Add increases around the lower curve only.
MISTAKE 6: THE MOTIF LOOKS CIRCULAR
Cause:
Increases were distributed evenly around the entire round.
Solution:
Concentrate increases along the lower curve and maintain one fixed top point.
MISTAKE 7: THE MOTIF RUFFLES NEAR THE BOTTOM
Cause:
Too many lower increases were added.
Solution:
Remove two to four increases from the next round.
MISTAKE 8: THE COLOR RINGS ARE UNEVEN
Cause:
A round contains missed or extra stitches.
Solution:
Count every round before changing colors.
MISTAKE 9: THE OPENWORK PULLS INWARD
Cause:
The chain spaces are too short.
Solution:
Add one or two chains to each arch.
MISTAKE 10: THE LACE BORDER RUFFLES
Cause:
The chain spaces are too long or contain too many stitches.
Solution:
Shorten the chains or reduce the scallop size.
MISTAKE 11: THE MOTIFS HAVE DIFFERENT SIZES
Cause:
The tension or hook size changed.
Solution:
Use one blocking template and measure every motif.
MISTAKE 12: THE JOINS PULL TIGHTLY
Cause:
The joining chains are too short.
Solution:
Use longer chain bridges or a larger hook.
MISTAKE 13: THE BEDSPREAD BUCKLES
Cause:
The motifs were not blocked before assembly.
Solution:
Block every motif individually and block the complete bedspread again.
MISTAKE 14: THE OUTER EDGES ARE UNEVEN
Cause:
The pointed motifs naturally create deep spaces.
Solution:
Use filling arches before beginning the main border.
MISTAKE 15: DARK YARN SHOWS BEHIND THE IVORY
Cause:
The dark yarn ends were carried behind the light stitches.
Solution:
Weave each yarn tail through stitches of the same color.
WEAVING IN THE ENDS
Thread each yarn tail onto a yarn needle.
Weave it through stitches of the same color.
Change direction at least once.
Avoid carrying navy or royal blue behind ivory stitches.
Leave tails at least 5 inches long.
Finish the ends after each batch of motifs instead of saving them all until the end.
BLOCKING THE COMPLETED BEDSPREAD
Wash the completed bedspread gently in cool or lukewarm water.
Use mild detergent.
Support the wet crochet with both hands.
Do not lift the bedspread by one corner.
Press out excess water.
Roll the bedspread inside several clean towels.
Arrange it on blocking mats, a clean floor, or a spare bed protected with towels.
Straighten the motif rows.
Shape the outer border.
Open the chain spaces.
Check the corners.
Measure the width and length.
Allow it to dry completely.
CARE INSTRUCTIONS
Hand washing is recommended.
If the yarn label permits machine washing:
Use cold water.
Select a gentle cycle.
Use mild detergent.
Avoid chlorine bleach.
Place the bedspread inside a large laundry bag if possible.
Do not tumble dry on high heat.
Dry flat or support the project evenly.
Never hang it while wet because the weight may stretch the motifs and joining seams.
Store it clean and dry.
Fold it loosely and change the fold lines occasionally.
FREQUENTLY ASKED QUESTIONS
CAN A BEGINNER MAKE THIS MOTIF?
A confident beginner can practice the center, but the complete motif is best for an intermediate crocheter because the teardrop shaping requires controlled increases.
HOW LONG WILL THE BEDSPREAD TAKE?
A large bedspread may require several weeks or months, depending on the motif count and the number of hours you crochet each week.
HOW MANY MOTIFS DO I NEED?
Make, block, and join several sample motifs. Use their joined measurements to calculate the required number.
CAN I USE ACRYLIC YARN?
Yes. Acrylic creates a lighter and warmer bedspread, but cotton usually provides sharper stitch definition.
CAN I USE WORSTED-WEIGHT YARN?
Yes, but the motifs will be larger and heavier. You will need fewer motifs.
CAN I USE CROCHET THREAD?
Yes. Crochet thread produces delicate heirloom lace but requires more time and more motifs.
DO I NEED FIVE COLORS?
No. The motif can be made with two, three, four, or five colors.
CAN I USE BLACK FOR THE CENTER?
Yes. Black creates a dramatic traditional eye-inspired appearance.
WHY DOES MY MOTIF LOOK DIFFERENT FROM THE IMAGE?
This is a photo-inspired reconstruction. It is intended to create a similar layered teardrop design rather than reproduce an unavailable original pattern exactly.
SHOULD I BLOCK BEFORE JOINING?
Yes. Blocking ensures that every motif has the same dimensions and makes joining easier.
WHAT IS THE EASIEST JOINING METHOD?
Whip stitching is one of the easiest methods because the full arrangement can be planned before sewing.
WHAT IS THE BEST JOIN FOR AN OPEN LACE EFFECT?
A chain-bridge join creates light and decorative spaces between the motifs.
CAN I MAKE ONLY ONE MOTIF?
Yes. A single motif can become a wall decoration, table mat, bag panel, coaster, or large appliqué.
HOW CAN I MAKE THE MOTIF SMALLER?
Use finer yarn, a smaller hook, or remove one colored body round.
HOW CAN I MAKE IT LARGER?
Add more body rounds while maintaining the pointed top and rounded lower increases.
CAN I SELL FINISHED ITEMS MADE FROM THIS GUIDE?
You may generally sell physical items crocheted from this photo-inspired guide. Use your own photographs and do not claim that the reconstruction is the exact original pattern shown in the reference image.
QUICK PATTERN SUMMARY
- Crochet a dark navy circular center.
- Add a turquoise ring.
- Mark one stitch as the upper point.
- Add aqua while beginning the teardrop shaping.
- Concentrate increases around the rounded bottom.
- Work a pointed corner at the top.
- Add an ivory contrast ring.
- Add a royal-blue outer body.
- Check the symmetry of both sides.
- Work the first ivory openwork round.
- Add radiating tall stitches.
- Crochet long chain arches.
- Finish with scallops or floral clusters.
- Block the sample motif.
- Make the required number of motifs.
- Arrange them in alternating rows.
- Join with sewing, slip stitches, or chain bridges.
- Add small filler flowers where needed.
- Straighten the outer edges.
- Add a decorative bedspread border.
FINAL THOUGHTS
This coastal teardrop crochet bedspread combines dramatic color, symbolic shape, and delicate lace in one memorable handmade design. The dark center and layered blue rings create depth, while the ivory openwork keeps the finished bedspread bright and airy.
The project becomes manageable when it is divided into individual motifs. Start with one sample, perfect the point and lower curve, record the final measurements, and then crochet the remaining motifs in small batches.
Careful counting, symmetrical shaping, secure joining, and thorough blocking will transform the separate teardrops into a beautiful coordinated bedspread. Matching pillow covers can complete the room and highlight the striking blue-and-ivory color palette.